Ocean Rotoflex
Nikol, Ahmedabad, Gujarat
GST No. 24AADFO5650R1ZS
TrustSEAL Verified
Call 0804898248783% Response Rate
SEND EMAIL
Rotogravure printing process
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
• Films such as polyester, OPP, nylon, and PE
• Papers
• Carton board
• Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
Rotogravure printing presses
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
• Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
• Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
• Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
• Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
• Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Product Details:
| Minimum Order Quantity | 1 Unit |
| Max Speed | 100-150 m/min, 200-250 m/min |
| Voltage | 32.5 ( hp ) |
| Printing Station | 1 to 10 Station |
| Max Web Width | 500-700 mm |
| Brand | Ocean International |
| Printing Method | Roll to Roll |
| No. Of Color | 1 to 10 Color |
| Printing Speed | 100 - 150 ( mtr/min ) |
| Weight | 4 - 5 ton |
| Automation Grade | Automatic |
| Operating Speed | 100 - 150 ( mtr/min ) |
| Warranty | 1 Year |
| I Deal In | New Only |
| Product Type | 2 Color Rotogravure Printing Machine |
| Processed Materials | Laminates |
| Working Width | 300 - 1550 ( mm ) |
| Printing Color | 1 to 10 Color |
| Applications | Lamination |
| Color Printing | Color Printing |
| Size/Dimension | 42 X 8 X 7 ( L X W X H ) |
| Printer Type | Rotogravure Printing Machine |
2 Color Rotogravure Printing Machine
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
• Films such as polyester, OPP, nylon, and PE
• Papers
• Carton board
• Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
2 Color Rotogravure Printing Machine
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
• Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
• Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
• Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
• Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
• Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 2 Color Rotogravure Printing Machine:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 2 Color Rotogravure Printing Machine:-
Typical gravure printed products include:
• Food packaging
• Wall paper
• Wrapping paper
• Furniture laminates
• Paneling
• Greeting cards
• Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Voltage | 32.5 ( hp ) |
| Product Type | Rotogravure Printing Machine |
| Printing Color | 1 - 10 Color |
| Processed Materials | Laminates |
| I Deal In | New Only |
| Applications | Lamination |
| Max Web Width | 500-700 mm |
| Printer Type | Rotogravure Printing Machine |
| Size/Dimension | 42 X 8 X 7 ( L X W X H ) |
| Color Printing | Color Printing |
| Automation Grade | Automatic |
| Working Width | 300 - 1550 ( mm ) |
| Max Speed | 100-150 m/min, 200-250 m/min |
| Printing Method | Roll to Roll |
| Printing Station | 1 - 10 Station |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Brand | Ocean International |
| No. Of Color | 1 to 10 Color |
| Power | 32.5 ( hp ) |
| Weight | 4 - 5 ton |
3 Drive Rotogravure Printing Machine
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
• Films such as polyester, OPP, nylon, and PE
• Papers
• Carton board
• Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
3 Drive Rotogravure Printing Machine:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
• Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
• Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
• Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
• Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
• Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down
Process description of 3 Drive Rotogravure Printing Machine:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 3 Drive Rotogravure Printing Machine:-
Typical gravure printed products include:
• Food packaging
• Wall paper
• Wrapping paper
• Furniture laminates
• Paneling
• Greeting cards
• Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Voltage | 32.5 ( hp ) |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
| Power | 32.5 ( hp ) |
| Printing Station | 1 - 10 Station |
| Product Type | Rotogravure Printing Machine |
| Applications | Lamination |
| Working Width | 300 - 1550 ( mm ) |
| Max Speed | 100-150 m/min, 200-250 m/min |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Printer Type | Rotogravure Printing Machine |
| Weight | 4 - 5 ton |
| Processed Materials | Laminates |
| Automation Grade | Automatic |
| Max Web Width | 500-700 mm |
| Printing Method | Roll to Roll |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Brand | Ocean International |
| Color Printing | Color Printing |
| No. Of Color | 1 to 10 Color |
| Printing Color | 1 - 10 Color |
| I Deal In | New Only |
3 Drive Rotogravure Printing Line
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
3 Drive Rotogravure Printing Line
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 3 Drive Rotogravure Printing Line:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 3 Drive Rotogravure Printing Line:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
MagazinesAdditional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Max Web Width | 500-700 mm |
| Power | 32.5 ( hp ) |
| Max Speed | 200-250 m/min |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Weight | 4 - 5 ton |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
| Applications | Lamination |
| I Deal In | New Only |
| Brand | Ocean International |
| Voltage | 32.5 ( hp ) |
| Printing Method | Roll to Roll |
| Working Width | 300 - 1550 ( mm ) |
| No. Of Color | 1 to 10 Color |
| Product Type | Rotogravure Printing Machine |
| Color Printing | Color Printing |
| Printing Color | 1 - 10 Color |
| Printing Station | 1 - 10 Station |
| Printer Type | Rotogravure Printing Machine |
| Processed Materials | Laminates |
| Automation Grade | Automatic |
3 Drive Rotogravure Printing Plant
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
• Films such as polyester, OPP, nylon, and PE
• Papers
• Carton board
• Aluminum foil
The modern day 3 Drive Rotogravure Printing Plant uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
3 Drive Rotogravure Printing Plant:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
• Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
• Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
• Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
• Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
• Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 3 Drive Rotogravure Printing Plant:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 3 Drive Rotogravure Printing Plant:-
Typical gravure printed products include:
• Food packaging
• Wall paper
• Wrapping paper
• Furniture laminates
• Paneling
• Greeting cards
• Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Printer Type | Rotogravure Printing Machine |
| Voltage | 32.5 ( hp ) |
| Color Printing | Color Printing |
| Printing Station | 1 to 10 Station |
| Working Width | 300 - 1550 ( mm ) |
| Printing Color | 1 to 10 Color |
| Size/Dimension | 42 X 8 X 7 ( L X W X H ) |
| No. Of Color | 1 to 10 Color |
| Printing Speed | 150 - 250 ( mtr/min ) |
| I Deal In | New Only |
| Brand | Ocean International |
| Processed Materials | Laminates |
| Printing Method | Roll to Roll |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Product Type | Rotogravure Printing Machine |
| Max Speed | 150 - 250 ( mtr/min ) |
| Applications | Lamination |
| Power | 32.5 ( hp ) |
| Weight | 4 - 5 ton |
| Automation Grade | Automatic |
Rotogravure Printing Machine in India
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
Rotogravure Printing Machine in India:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of Rotogravure Printing Machine in India:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of Rotogravure Printing Machine in India:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
MagazinesAdditional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Weight | 4 - 5 ton |
| Printer Type | Rotogravure Printing Machine |
| Printing Color | 1 to 10 Color |
| Printing Station | 1 to 10 Station |
| Product Type | Rotogravure Printing Machine |
| Power | 32.5 ( hp ) |
| Brand | Ocean International |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
| I Deal In | New Only |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Max Speed | 150 - 250 ( mtr/min ) |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Processed Materials | Laminates |
| Working Width | 300 - 1550 ( mm ) |
| No. Of Color | 1 to 10 Color |
| Color Printing | Color Printing |
| Voltage | 32.5 ( hp ) |
| Automation Grade | Automatic |
| Printing Method | Roll to Roll |
| Applications | Lamination |
Rotogravure Printing Machine in Ahmedabad
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
Rotogravure Printing Machine in Ahmedabad
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of Rotogravure Printing Machine in Ahmedabad:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of Rotogravure Printing Machine in Ahmedabad:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
MagazinesAdditional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Color Printing | Color Printing |
| Printer Type | Rotogravure Printing Machine |
| Max Web Width | 500-700 mm |
| No. Of Color | 1 to 10 Color |
| I Deal In | New Only |
| Processed Materials | Laminates |
| Applications | Lamination |
| Size/Dimension | 42 X 8 X 7 ( L X W X H ) |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Weight | 4 - 5 ton |
| Printing Color | 1 to 10 Color |
| Automation Grade | Automatic |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Product Type | Rotogravure Printing Machine |
| Brand | Ocean International |
| Voltage | 32.5 ( hp ) |
| Printing Station | 1 to 10 Station |
| Power | 32.5 ( hp ) |
| Max Speed | 200-250 m/min, 100-150 m/min |
| Printing Method | Roll to Roll |
| Working Width | 300 - 1550 ( mm ) |
Rotogravure Printing Machine Manufacturer
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
Rotogravure Printing Machine Manufacturer
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of Rotogravure Printing Machine Manufacturer:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of Rotogravure Printing Machine Manufacturer:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
MagazinesAdditional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Automation Grade | Automatic |
| Applications | Lamination |
| Color Printing | Color Printing |
| Printing Method | Roll to Roll |
| Max Speed | 100-150 m/min, 200-250 m/min |
| Max Web Width | 500-700 mm |
| Printing Station | Customized |
| Processed Materials | Laminates |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
| Brand | OCEAN INTERNATIONAL |
Rotogravure Printing Unit:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
Rotogravure Printing Unit:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of Rotogravure Printing Unit:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of Rotogravure Printing Unit:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Printing Method | Roll to Roll |
| Working Width | 300 - 1550 ( mm ) |
| Product Type | Rotogravure Printing Machine |
| No. Of Color | 1 to 10 Color |
| Printer Type | Rotogravure Printing Machine |
| Max Web Width | 500-700 mm |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Weight | 4 - 5 ton |
| Color Printing | Color Printing |
| Automation Grade | Automatic |
| Printing Station | 1 to 10 Station |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Processed Materials | Laminates |
| Power | 32.5 ( hp ) |
| Size/Dimension | 42 X 8 X 7 ( L X W X H ) |
| Brand | Ocean International |
| Max Speed | 200-250 m/min, 100-150 m/min |
| I Deal In | New Only |
| Voltage | 32.5 ( hp ) |
| Printing Color | 1 to 10 Color |
| Applications | Lamination |
Rotogravure Printing Machine Manufacturer in India:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
Rotogravure printing presses of Rotogravure Printing Machine Manufacturer in India:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of Rotogravure Printing Machine Manufacturer in India:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of Rotogravure Printing Machine Manufacturer in India:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Printing Color | 1 to 10 Color |
| Printing Method | Roll to Roll |
| Product Type | Rotogravure Printing Machine |
| Color Printing | Color Printing |
| Max Web Width | 500-700 mm |
| Applications | Lamination |
| Max Speed | 100-150 m/min, 200-250 m/min |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
| Working Width | 300 - 1550 ( mm ) |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Automation Grade | Automatic |
| Weight | 4 - 5 ton |
| Brand | Ocean Rotoflex |
| Printing Station | 1 to 10 Station |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Power | 32.5 ( hp ) |
| Voltage | 32.5 ( hp ) |
| I Deal In | New Only |
| Processed Materials | Laminates |
| No. Of Color | 1 to 10 Color |
| Printer Type | Rotogravure Printing Machine |
3 Drive Rotogravure Printing Plant:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
3 Drive Rotogravure Printing Plant:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 3 Drive Rotogravure Printing Plant:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 3 Drive Rotogravure Printing Plant:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Power | 32.5 ( hp ) |
| No. Of Color | 1 to 10 Color |
| Printing Color | 1 to 10 Color |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Weight | 4 - 5 ton |
| Applications | Lamination |
| Working Width | 300 - 1550 ( mm ) |
| Color Printing | Color Printing |
| I Deal In | New Only |
| Max Web Width | 500-700 mm |
| Printer Type | Rotogravure Printing Machine |
| Voltage | 32.5 ( hp ) |
| Printing Station | 1 to 10 Station |
| Printing Method | Roll to Roll |
| Processed Materials | Laminates |
| Product Type | Rotogravure Printing Machine |
| Max Speed | 200-250 m/min, 100-150 m/min |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Brand | Ocean International |
| Automation Grade | Automatic |
3 Drive Rotogravure Printing Machine Manufacturer:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
3 Drive Rotogravure Printing Machine Manufacturer:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 3 Drive Rotogravure Printing Machine Manufacturer:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 3 Drive Rotogravure Printing Machine Manufacturer:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Size/Dimension | 42 X 8 X 7 ( L X W X H ) |
| Warranty | 1 Year |
| Automation Grade | Automatic |
| Printer Type | Rotogravure Printing Machine |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Brand | Ocean International |
| Max Speed | 100-150 m/min, 200-250 m/min |
| Printing Color | 1 to 10 Color |
| Voltage | 32.5 ( hp ) |
| Weight | 4 - 5 ton |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Max Web Width | 500-700 mm |
| Printing Station | 1 to 10 Station |
| I Deal In | New Only |
| Applications | Lamination |
| No. Of Color | 1 to 10 Color |
| Product Type | Rotogravure Printing Machine |
| Power | 32.5 ( hp ) |
| Working Width | 300 - 1550 ( mm ) |
| Printing Method | Roll to Roll |
| Processed Materials | Laminates |
| Color Printing | Color Printing |
4 Color Rotogravure Printing Machine:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
4 Color Rotogravure Printing Machine:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 4 Color Rotogravure Printing Machine:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 4 Color Rotogravure Printing Machine:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Processed Materials | Laminates |
| Working Width | 300 - 1550 ( mm ) |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
| Printing Speed | 150 - 250 ( mtr/min ) |
| I Deal In | New Only |
| Automation Grade | Automatic |
| Applications | Lamination |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Printer Type | Rotogravure Printing Machine |
| Voltage | 32.5 ( hp ) |
| No. Of Color | 1 to 10 Color |
| Product Type | Rotogravure Printing Machine |
| Max Speed | 100-150 m/min, 200-250 m/min |
| Max Web Width | 500-700 mm |
| Power | 32.5 ( hp ) |
| Printing Station | 1 to 10 Station |
| Color Printing | Color Printing |
| Printing Color | 1 to 10 Color |
| Weight | 4 - 5 ton |
| Brand | OCEAN INTERNATIONAL |
4 Color Rotogravure Printing Plant:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
4 Color Rotogravure Printing Plant:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 4 Color Rotogravure Printing Plant:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 4 Color Rotogravure Printing Plant:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Processed Materials | Laminates |
| Max Web Width | 500-700 mm |
| Brand | Ocean International |
| Working Width | 300 - 1550 ( mm ) |
| I Deal In | New Only |
| Printer Type | Rotogravure Printing Machine |
| Weight | 4 - 5 ton |
| Printing Method | Roll to Roll |
| No. Of Color | 1 to 10 Color |
| Voltage | 32.5 ( hp ) |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
| Color Printing | Color Printing |
| Automation Grade | Automatic |
| Power | 32.5 ( hp ) |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Printing Station | 1 to 10 Station |
| Max Speed | 200-250 m/min, 100-150 m/min |
| Product Type | Rotogravure Printing Machine |
| Applications | Lamination |
| Printing Color | 1 to 10 Color |
| Printing Speed | 150 - 250 ( mtr/min ) |
4 Color Rotogravure Printing Line:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
4 Color Rotogravure Printing Line:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 4 Color Rotogravure Printing Line:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 4 Color Rotogravure Printing Line:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Product Type | Rotogravure Printing Machine |
| Applications | Lamination |
| Max Speed | 200-250 m/min, 100-150 m/min, 50-100 m/min |
| Dimension / Size | 42 X 8 X 7 ( L X W X H ) |
| Processed Materials | Laminates |
| Printing Station | 1 to 10 Station |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
| Printing Color | 1 to 10 Color |
| Weight | 4 - 5 ton |
| Max Web Width | 500-700 mm |
| Automation Grade | Automatic |
| I Deal In | New Only |
| Brand | Ocean International |
| Operating Speed | 150 - 250 ( mtr/min ) |
| No. Of Color | 1 to 10 Color |
| Working Width | 300 - 1550 ( mm ) |
| Printing Method | Roll to Roll |
| Printer Type | Rotogravure Printing Machine |
| Voltage | 32.5 ( hp ) |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Color Printing | Color Printing |
| Power | 32.5 ( hp ) |
Rotogravure Printing Process in India:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
Rotogravure Printing Process in India:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of Rotogravure Printing Process in India:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of Rotogravure Printing Process in India:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Automation Grade | Automatic |
| Max Speed | 200-250 m/min, 100-150 m/min |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Max Web Width | 500-700 mm |
| Applications | Lamination |
| Working Width | 300 - 1550 ( mm ) |
| Dimension / Size | 42 X 8 X 7 ( L X W X H ) |
| No. Of Color | 1 to 10 Color |
| Printing Station | 1 to 10 Station |
| Power | 32.5 ( hp ) |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Brand | Ocean International |
| Voltage | 32.5 ( hp ) |
| Printing Method | Roll to Roll |
| Processed Materials | Laminates |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
| Printer Type | Rotogravure Printing Machine |
| I Deal In | New Only |
| Printing Color | 1 to 10 Color |
| Color Printing | Color Printing |
| Product Type | Rotogravure Printing Machine |
| Weight | 4 - 5 ton |
Rotogravure printing process:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
Rotogravure Printing Process:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of Rotogravure Printing Process:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of Rotogravure Printing Process:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Color Printing | Color Printing |
| Automation Grade | Automatic |
| Printer Type | Rotogravure Printing Machine |
| Processed Materials | Laminates |
| Brand | Ocean International |
| Printing Station | 1 to 10 Station |
| Max Speed | 100-150 m/min, 200-250 m/min |
| Printing Method | Roll to Roll |
| Working Width | 300 - 1550 ( mm ) |
| Max Web Width | 500-700 mm |
| I Deal In | New Only |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
| No. Of Color | 1 to 10 Color |
| Printing Color | 1 to 10 Color |
| Product Type | Rotogravure Printing Machine |
| Weight | 4 - 5 ton |
| Voltage | 32.5 ( hp ) |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Power | 32.5 ( hp ) |
| Applications | Lamination |
| Operating Speed | 150 - 250 ( mtr/min ) |
4 Color Rotogravure Printing Machine Manufacturer:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
4 Color Rotogravure Printing Machine Manufacturer:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 4 Color Rotogravure Printing Machine Manufacturer:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 4 Color Rotogravure Printing Machine Manufacturer:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Power | 32.5 ( hp ) |
| Printer Type | Rotogravure Printing Machine |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Product Type | Rotogravure Printing Machine |
| Printing Method | Roll to Roll |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Automation Grade | Automatic |
| Processed Materials | Laminates |
| Working Width | 300 - 1550 ( mm ) |
| No. Of Color | 1 to 10 Color |
| Brand | Ocean International |
| Color Printing | Color Printing |
| Warranty | 1 Year |
| Printing Station | 1 to 10 Station |
| Voltage | 32.5 ( hp ) |
| I Deal In | New Only |
| Printing Color | 1 to 10 Color |
| Max Web Width | 500-700 mm |
| Max Speed | 200-250 m/min, 100-150 m/min |
| Applications | Lamination |
| Size/Dimension | 42 X 8 X 7 ( L X W X H ) |
| Weight | 4 - 5 ton |
4 Color Rotogravure Printing Machine in India:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
4 Color Rotogravure Printing Machine in India:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 4 Color Rotogravure Printing Machine in India:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 4 Color Rotogravure Printing Machine in India:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Printing Method | Roll to Roll |
| Color Printing | Color Printing |
| Weight | 4 - 5 ton |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
| Printer Type | Rotogravure Printing Machine |
| Printing Station | 1 to 10 Station |
| Max Web Width | 500-700 mm |
| Working Width | 300 - 1550 ( mm ) |
| I Deal In | New Only |
| Printing Color | 1 to 10 Color |
| Processed Materials | Laminates |
| No. Of Color | 1 to 10 Color |
| Product Type | Rotogravure Printing Machine |
| Voltage | 32.5 ( hp ) |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Automation Grade | Automatic |
| Max Speed | 100-150 m/min, 200-250 m/min |
| Brand | Ocean International |
| Power | 32.5 ( hp ) |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Applications | Lamination |
4 Color Rotogravure Printing Plant Manufacturer:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
4 Color Rotogravure Printing Plant Manufacturer:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 4 Color Rotogravure Printing Plant Manufacturer:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 4 Color Rotogravure Printing Plant Manufacturer:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| No. Of Color | 1 to 10 Color |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Product Type | Rotogravure Printing Machine |
| Printing Method | Roll to Roll |
| Power | 32.5 ( hp ) |
| Weight | 4 - 5 ton |
| Max Web Width | 500-700 mm |
| Processed Materials | Laminates |
| Printer Type | Rotogravure Printing Machine |
| Automation Grade | Automatic |
| Working Width | 300 - 1550 ( mm ) |
| Brand | Ocean International |
| Printing Station | 1 to 10 Station |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Printing Color | 1 to 10 Color |
| Voltage | 32.5 ( hp ) |
| I Deal In | New Only |
| Size/Dimension | 42 X 8 X 7 ( L X W X H ) |
| Color Printing | Color Printing |
| Applications | Lamination |
| Max Speed | 100-150 m/min, 200-250 m/min |
4 Color Rotogravure Printing Line in India:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
4 Color Rotogravure Printing Line in India:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 4 Color Rotogravure Printing Line in India:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 4 Color Rotogravure Printing Line in India:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Printing Station | 1 to 10 Station |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Product Type | Rotogravure Printing Machine |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Power | 32.5 ( hp ) |
| Printing Method | Roll to Roll |
| Processed Materials | Laminates |
| Printer Type | Rotogravure Printing Machine |
| Voltage | 32.5 ( hp ) |
| Max Speed | 200-250 m/min, 100-150 m/min |
| Printing Color | 1 to 10 Color |
| Applications | Lamination |
| No. Of Color | 1 to 10 Color |
| Working Width | 300 - 1550 ( mm ) |
| Brand | Ocean International |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
| I Deal In | New Only |
| Max Web Width | 500-700 mm |
| Automation Grade | Automatic |
| Color Printing | Color Printing |
| Weight | 4 - 5 ton |
4 Color Rotogravure Printing Line Manufacturer:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
4 Color Rotogravure Printing Line Manufacturer:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 4 Color Rotogravure Printing Line Manufacturer:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 4 Color Rotogravure Printing Line Manufacturer:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Brand | Ocean International |
| Automation Grade | Automatic |
| Printing Method | Roll to Roll |
| Color Printing | Color Printing |
| Printing Station | 1 to 10 Station |
| I Deal In | New Only |
| Max Web Width | 500-700 mm |
| Processed Materials | Laminates |
| No. Of Color | 1 to 10 Color |
| Weight | 4 - 5 ton |
| Voltage | 32.5 ( hp ) |
| Max Speed | 100-150 m/min, 200-250 m/min |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
| Power | 32.5 ( hp ) |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Product Type | Rotogravure Printing Machine |
| Working Width | 300 - 1550 ( mm ) |
| Applications | Lamination |
| Printing Color | 1 to 10 Color |
| Printer Type | Rotogravure Printing Machine |
6 Color Rotogravure Printing Machine:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
6 Color Rotogravure Printing Machine:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 6 Color Rotogravure Printing Machine:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 6 Color Rotogravure Printing Machine:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Processed Materials | Laminates |
| Brand | OCEAN INTERNATIONAL |
| No. Of Color | 1 to 10 Color |
| I Deal In | New Only |
| Applications | Lamination |
| Product Type | Rotogravure Printing Machine |
| Max Speed | 200-250 m/min, 100-150 m/min |
| Max Web Width | 500-700 mm |
| Weight | 4 - 5 ton |
| Color Printing | Color Printing |
| Working Width | 300 - 1550 ( mm ) |
| Voltage | 32.5 ( hp ) |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
| Printer Type | Rotogravure Printing Machine |
| Power | 32.5 ( hp ) |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Printing Station | 1 to 10 Station |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Printing Color | 1 to 10 Color |
| Automation Grade | Automatic |
6 Color Rotogravure Printing Plant:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
6 Color Rotogravure Printing Plant:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 6 Color Rotogravure Printing Plant:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 6 Color Rotogravure Printing Plant:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Processed Materials | Laminates |
| Printing Color | 1 to 10 Color |
| Power | 32.5 ( hp ) |
| Printer Type | Rotogravure Printing Machine |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Brand | Ocean International |
| Max Speed | 100-150 m/min, 200-250 m/min |
| I Deal In | New Only |
| Working Width | 300 - 1550 ( mm ) |
| Weight | 4 - 5 ton |
| Automation Grade | Automatic |
| Applications | Lamination |
| Product Type | Rotogravure Printing Machine |
| Color Printing | Color Printing |
| Voltage | 32.5 ( hp ) |
| Printing Method | Roll to Roll |
| Max Web Width | 500-700 mm |
| No. Of Color | 1 to 10 Color |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
| Printing Station | 1 to 10 Station |
6 Color Rotogravure Printing Line:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
6 Color Rotogravure Printing Line:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 6 Color Rotogravure Printing Line:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 6 Color Rotogravure Printing Line:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Working Width | 300 - 1550 ( mm ) |
| Color Printing | Color Printing |
| Power | 32.5 ( hp ) |
| Printer Type | Rotogravure Printing Machine |
| No. Of Color | 1 to 10 Color |
| I Deal In | New Only |
| Printing Station | 1 to 10 Station |
| Product Type | Rotogravure Printing Machine |
| Max Speed | 200-250 m/min, 100-150 m/min |
| Brand | Ocean International |
| Voltage | 32.5 ( hp ) |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Printing Color | 1 to 10 Color |
| Weight | 4 - 5 ton |
| Max Web Width | 500-700 mm |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Applications | Lamination |
| Processed Materials | Laminates |
6 Color Rotogravure Printing Machine in India:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
6 Color Rotogravure Printing Machine in India:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 6 Color Rotogravure Printing Machine in India:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 6 Color Rotogravure Printing Machine in India:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
| Printer Type | Rotogravure Printing Machine |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Voltage | 32.5 ( hp ) |
| Power | 32.5 ( hp ) |
| I Deal In | New Only |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Max Web Width | 500-700 mm |
| Printing Color | 1 to 10 Color |
| Printing Station | 1 to 10 Station |
| Brand | OCEAN INTERNATIONAL |
| Weight | 4 - 5 ton |
| No. Of Color | 1 to 10 Color |
| Product Type | Rotogravure Printing Machine |
| Max Speed | 200-250 m/min, 100-150 m/min |
| Processed Materials | Laminates |
| Applications | Lamination |
| Printing Method | Roll to Roll |
| Working Width | 300 - 1550 ( mm ) |
| Color Printing | Color Printing |
| Automation Grade | Automatic |
6 Color Rotogravure Printing Plant in India:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
6 Color Rotogravure Printing Plant in India:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 6 Color Rotogravure Printing Plant in India:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 6 Color Rotogravure Printing Plant in India:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Automation Grade | Automatic |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
| No. Of Color | 1 to 10 Color |
| Processed Materials | Laminates |
| Applications | Lamination |
| Max Speed | 100-150 m/min, 200-250 m/min |
| Printing Color | 1 to 10 Color |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Voltage | 32.5 ( hp ) |
| Printing Method | Roll to Roll |
| Power | 32.5 ( hp ) |
| Weight | 4 - 5 ton |
| Working Width | 300 - 1550 ( mm ) |
| Max Web Width | 500-700 mm |
| Brand | Ocean International |
| Color Printing | Color Printing |
| Printer Type | Rotogravure Printing Machine |
| Product Type | Rotogravure Printing Machine |
| I Deal In | New Only |
| Printing Station | 1 to 10 Station |
| Printing Speed | 150 - 250 ( mtr/min ) |
6 Color Rotogravure Printing Line in India:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
6 Color Rotogravure Printing Line in India:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
6 Color Rotogravure Printing Line in India:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 6 Color Rotogravure Printing Line in India:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| No. Of Color | 1 to 10 Color |
| I Deal In | New Only |
| Power | 32.5 ( hp ) |
| Processed Materials | Laminates |
| Weight | 4 - 5 ton |
| Brand | Ocean International |
| Printing Color | 1 to 10 Color |
| Working Width | 300 - 1550 ( mm ) |
| Printing Station | 1 to 10 Station |
| Size/Dimension | 42 X 8 X 7 ( L X W X H ) |
| Max Speed | 100-150 m/min, 200-250 m/min |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Color Printing | Color Printing |
| Product Type | Rotogravure Printing Machine |
| Applications | Lamination |
| Printer Type | Rotogravure Printing Machine |
| Voltage | 32.5 ( hp ) |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Max Web Width | 500-700 mm |
| Printing Method | Roll to Roll |
| Automation Grade | Automatic |
6 Color Rotogravure Printing Machine Manufacturer:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
6 Color Rotogravure Printing Machine Manufacturer:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 6 Color Rotogravure Printing Machine Manufacturer:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 6 Color Rotogravure Printing Machine Manufacturer:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Printing Color | 1 to 10 Color |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
| No. Of Color | 1 to 10 Color |
| Printer Type | Rotogravure Printing Machine |
| Printing Station | 1 to 10 Station |
| Voltage | 32.5 ( hp ) |
| I Deal In | New Only |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Power | 32.5 ( hp ) |
| Max Speed | 100-150 m/min, 200-250 m/min |
| Automation Grade | Automatic |
| Max Web Width | 500-700 mm |
| Working Width | 300 - 1550 ( mm ) |
| Brand | Ocean International |
| Processed Materials | Laminates |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Color Printing | Color Printing |
| Weight | 4 - 5 ton |
| Applications | Lamination |
| Product Type | Rotogravure Printing Machine |
| Printing Method | Roll to Roll |
6 Color Rotogravure Printing Plant Manufacturer:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
6 Color Rotogravure Printing Plant Manufacturer:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 6 Color Rotogravure Printing Plant Manufacturer:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 6 Color Rotogravure Printing Plant Manufacturer:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Weight | 4 - 5 ton |
| Printing Method | Roll to Roll |
| Printing Color | 1 to 10 Color |
| Automation Grade | Automatic |
| Color Printing | Color Printing |
| Applications | Lamination |
| Printing Station | 1 to 10 Station |
| No. Of Color | 1 to 10 Color |
| Printer Type | Rotogravure Printing Machine |
| Working Width | 300 - 1550 ( mm ) |
| Processed Materials | Laminates |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Max Speed | 200-250 m/min, 100-150 m/min |
| Brand | Ocean International |
| Voltage | 32.5 ( hp ) |
| I Deal In | New Only |
| Max Web Width | 500-700 mm |
| Power | 32.5 ( hp ) |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
| Product Type | Rotogravure Printing Machine |
6 Color Rotogravure Printing Line Manufacturer:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
6 Color Rotogravure Printing Line Manufacturer:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 6 Color Rotogravure Printing Line Manufacturer:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 6 Color Rotogravure Printing Line Manufacturer:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Brand | Ocean International |
| Operating Speed | 150 - 250 ( mtr/min ) |
| No. Of Color | 1 to 10 Color |
| Product Type | Rotogravure Printing Machine |
| Printing Color | 1 to 10 Color |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
| Applications | Lamination |
| Voltage | 32.5 ( hp ) |
| Printing Method | Roll to Roll |
| Color Printing | Color Printing |
| Weight | 4 - 5 ton |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Printing Station | 1 to 10 Station |
| Power | 32.5 ( hp ) |
| Max Web Width | 500-700 mm |
| Working Width | 300 - 1550 ( mm ) |
| I Deal In | New Only |
| Processed Materials | Laminates |
| Automation Grade | Automatic |
| Printer Type | Rotogravure Printing Machine |
| Max Speed | 100-150 m/min, 200-250 m/min |
Automatic Rotogravure Printing Machine:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
Automatic Rotogravure Printing Machine:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of Automatic Rotogravure Printing Machine:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of Automatic Rotogravure Printing Machine:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Weight | 4 - 5 ton |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Automation Grade | Automatic |
| Applications | Lamination |
| Product Type | Rotogravure Printing Machine |
| Working Width | 300 - 1550 ( mm ) |
| Power | 32.5 ( hp ) |
| Printing Color | 1 to 10 Color |
| Printer Type | Rotogravure Printing Machine |
| Max Web Width | 500-700 mm |
| Brand | OCEAN INTERNATIONAL |
| Max Speed | 200-250 m/min, 100-150 m/min |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
| Processed Materials | Laminates |
| No. Of Color | 1 to 10 Color |
| I Deal In | New Only |
| Color Printing | Color Printing |
| Voltage | 32.5 ( hp ) |
| Printing Station | 1 to 10 Station |
| Operating Speed | 150 - 250 ( mtr/min ) |
Automatic Rotogravure Printing Plant:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
Automatic Rotogravure Printing Plant:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of Automatic Rotogravure Printing Plant:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of Automatic Rotogravure Printing Plant:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Max Web Width | 500-700 mm |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Max Speed | 100-150 m/min, 200-250 m/min |
| Working Width | 300 - 1550 ( mm ) |
| Power | 32.5 ( hp ) |
| Printer Type | Rotogravure Printing Machine |
| I Deal In | New Only |
| No. Of Color | 1 to 10 Color |
| Brand | Ocean International |
| Weight | 4 - 5 ton |
| Color Printing | Color Printing |
| Applications | Lamination |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Printing Color | 1 to 10 Color |
| Printing Station | 1 to 10 Station |
| Processed Materials | Laminates |
| Printing Method | Roll to Roll |
| Size/Dimension | 42 X 8 X 7 ( L X W X H ) |
| Product Type | Rotogravure Printing Machine |
| Voltage | 32.5 ( hp ) |
| Automation Grade | Automatic |
Automatic Rotogravure Printing Line:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
Automatic Rotogravure Printing Line:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of Automatic Rotogravure Printing Line:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of Automatic Rotogravure Printing Line:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Power | 32.5 ( hp ) |
| I Deal In | New Only |
| Automation Grade | Automatic |
| Printing Station | 1 to 10 Station |
| Applications | Lamination |
| Processed Materials | Laminates |
| Printing Color | 1 to 10 Color |
| Working Width | 300 - 1550 ( mm ) |
| No. Of Color | 1 to 10 Color |
| Max Speed | 100-150 m/min, 200-250 m/min |
| Weight | 4 - 5 ton |
| Voltage | 32.5 ( hp ) |
| Color Printing | Color Printing |
| Brand | OCEAN INTERNATIONAL |
| Max Web Width | 500-700 mm |
| Printing Method | Roll to Roll |
| Product Type | Rotogravure Printing Machine |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Printer Type | Rotogravure Printing Machine |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
High Speed Rotogravure Printing Plant:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
High Speed Rotogravure Printing Plant:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of High Speed Rotogravure Printing Plant:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of High Speed Rotogravure Printing Plant:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Product Type | Rotogravure Printing Machine |
| Brand | Ocean International |
| No. Of Color | 1 to 10 Color |
| Printer Type | Rotogravure Printing Machine |
| Working Width | 300 - 1550 ( mm ) |
| Max Speed | 100-150 m/min, 200-250 m/min |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Applications | Lamination |
| I Deal In | New Only |
| Processed Materials | Laminates |
| Printing Station | 1 to 10 Station |
| Max Web Width | 500-700 mm |
| Voltage | 32.5 ( hp ) |
| Color Printing | Color Printing |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
| Power | 32.5 ( hp ) |
| Automation Grade | Automatic |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Weight | 4 - 5 ton |
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
High Speed Rotogravure Printing MachinePrinting cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of High Speed Rotogravure Printing Machine:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of High Speed Rotogravure Printing Machine:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Working Width | 300 - 1550 ( mm ) |
| Max Speed | 200-250 m/min, 100-150 m/min |
| Voltage | 32.5 ( hp ) |
| Printing Method | Roll to Roll |
| Max Web Width | 500-700 mm |
| Size/Dimension | 42 X 8 X 7 ( L X W X H ) |
| Printing Color | 1 to 10 Color |
| Printer Type | Rotogravure Printing Machine |
| I Deal In | New Only |
| Processed Materials | Laminates |
| Power | 32.5 ( hp ) |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Weight | 4 - 5 ton |
| Printing Station | 1 to 10 Station |
| Product Type | Rotogravure Printing Machine |
| No. Of Color | 1 to 10 Color |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Color Printing | Color Printing |
| Automation Grade | Automatic |
| Applications | Lamination |
| Brand | Ocean International |
High Speed Rotogravure Printing Line:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
Rotogravure printing presses
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of High Speed Rotogravure Printing Line:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of High Speed Rotogravure Printing Line:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Processed Materials | Laminates |
| Voltage | 32.5 ( hp ) |
| Power | 32.5 ( hp ) |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Applications | Lamination |
| No. Of Color | 1 to 10 Color |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Printing Station | 1 to 10 Station |
| Printer Type | Rotogravure Printing Machine |
| Product Type | Rotogravure Printing Machine |
| I Deal In | New Only |
| Max Speed | 100-150 m/min, 200-250 m/min |
| Automation Grade | Automatic |
| Color Printing | Color Printing |
| Weight | 4 - 5 ton |
| Working Width | 300 - 1550 ( mm ) |
| Printing Method | Roll to Roll |
| Max Web Width | 500-700 mm |
| Brand | Ocean International |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
High Speed Rotogravure Printing Machine in India:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
Rotogravure printing presses
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of :-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of High Speed Rotogravure Printing Machine in India:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Size/Dimension | 42 X 8 X 7 ( L X W X H ) |
| Printing Station | 1 to 10 Station |
| No. Of Color | 1 to 10 Color |
| I Deal In | New Only |
| Printing Method | Roll to Roll |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Max Speed | 100-150 m/min, 200-250 m/min |
| Color Printing | Color Printing |
| Applications | Lamination |
| Weight | 4 - 5 ton |
| Printer Type | Rotogravure Printing Machine |
| Max Web Width | 500-700 mm |
| Processed Materials | Laminates |
| Power | 32.5 ( hp ) |
| Working Width | 300 - 1550 ( mm ) |
| Automation Grade | Automatic |
| Voltage | 32.5 ( hp ) |
| Brand | Ocean International |
| Product Type | Rotogravure Printing Machine |
High Speed Rotogravure Printing Machine Manufacturer:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
Rotogravure printing presses
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of High Speed Rotogravure Printing Machine Manufacturer:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of High Speed Rotogravure Printing Machine Manufacturer:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Color Printing | Color Printing |
| Max Speed | 100-150 m/min, 200-250 m/min |
| Max Web Width | 500-700 mm |
| Automation Grade | Automatic |
| Printing Station | Customized |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
| No. Of Color | 1 - 10 |
Rotogravure printing process
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
Rotogravure printing presses
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of :-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of :-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Printer Type | Rotogravure Printing Machine |
| Processed Materials | Laminates |
| Applications | Lamination |
| Printing Speed | 150 - 250 ( mtr/min ) |
| Brand | Ocean International |
| No. Of Color | 1 to 10 Color |
| Color Printing | Color Printing |
| Working Width | 300 - 1550 ( mm ) |
| I Deal In | New Only |
| Printing Method | Roll to Roll |
| Max Speed | 200-250 m/min, 100-150 m/min |
| Printing Color | 1 to 10 Color |
| Max Web Width | 500-700 mm |
| Automation Grade | Automatic |
| Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
| Operating Speed | 150 - 250 ( mtr/min ) |
| Weight | 4 - 5 ton |
| Printing Station | 1 to 10 Station |
| Power | 32.5 ( hp ) |
| Product Type | Rotogravure Printing Machine |
| Voltage | 32.5 ( hp ) |
Automatic Rotogravure Printing Plant Manufacturer:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
Automatic Rotogravure Printing Plant Manufacturer:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of Automatic Rotogravure Printing Plant Manufacturer:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of Automatic Rotogravure Printing Plant Manufacturer:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information: