Rotogravure Printing Machines

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

This Rotogravure Printing Machine Is Suitable For Multi-Color Once-Through Continuous Printing For Roll Film Materials With Excellent Printing Performance Such As BOPP, PET, PVC, PE, Aluminum Foil And Paper, Etc. It Is Composed Of Unwinding Unit, In-Feed Drive Unit, Printing Units, Drying Units, Out-Feed Drive Unit, Rewinding Unit, Electrical Control Section And Control Gauges.

 

Feature of Multi Color Rotogravure Printing Machine:-

1 Equipped With Microprocessor And Can Correct The Deviation Of Color

Register Quickly And Accurately.

2. In 7" Touch Screen Man-Machine Interface, With Web Video.

3. External Un/Rewinding Section, Non-Stop Material Splicing.

4.Closed Oven And Independent Heating Hot Air Blowing System, Automatic

Constant Temperature System.

5.Pneumatic Impressing System And Pneumatic Doctor Blade System,

Diaphragm-Type Pneumatic Ink Auto Circulating System.

Rotogravure Printing Machine Technical Data:

BOPP???15-60um PET???12-60um PVC:30-60um

CPP???25-60um PE???40-100um Cello paper???20-30um

paper???30-80g Laminated film???10-60um

2 Printing color quantity:8color

3 Machinery speed: 130m/min

4 Printing speed: 10-120m/min

5 Diameter of printing plate: ø100mm~ø320mm

6 Machine total power : about 110kw

7 Max printing width: 800mm

8,Max material width: 830mm

9 Max diameter of unwinding and rewinding: ø600mm

10 Pressure source: 0.8Mpa

11 Scope of tension: 3-25KG

12 Tension precision: ±0.3K

13 Machine Size: 13500X2800X 2600mm

15 Weight of machine: 14T

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

This Rotogravure Printing Machine Is Suitable For Multi-Color Once-Through Continuous Printing For Roll Film Materials With Excellent Printing Performance Such As BOPP, PET, PVC, PE, Aluminum Foil And Paper, Etc. It Is Composed Of Unwinding Unit, In-Feed Drive Unit, Printing Units, Drying Units, Out-Feed Drive Unit, Rewinding Unit, Electrical Control Section And Control Gauges.

 

Feature of Multi Color Rotogravure Printing Machine:-

1 Equipped With Microprocessor And Can Correct The Deviation Of Color

Register Quickly And Accurately.

2. In 7" Touch Screen Man-Machine Interface, With Web Video.

3. External Un/Rewinding Section, Non-Stop Material Splicing.

4.Closed Oven And Independent Heating Hot Air Blowing System, Automatic

Constant Temperature System.

5.Pneumatic Impressing System And Pneumatic Doctor Blade System,

Diaphragm-Type Pneumatic Ink Auto Circulating System.

Rotogravure Printing Machine Technical Data:

BOPP???15-60um PET???12-60um PVC:30-60um

CPP???25-60um PE???40-100um Cello paper???20-30um

paper???30-80g Laminated film???10-60um

2 Printing color quantity:8color

3 Machinery speed: 130m/min

4 Printing speed: 10-120m/min

5 Diameter of printing plate: ø100mm~ø320mm

6 Machine total power : about 110kw

7 Max printing width: 800mm

8,Max material width: 830mm

9 Max diameter of unwinding and rewinding: ø600mm

10 Pressure source: 0.8Mpa

11 Scope of tension: 3-25KG

12 Tension precision: ±0.3K

13 Machine Size: 13500X2800X 2600mm

15 Weight of machine: 14T

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

4 Color Rotogravure Printing Making Machine
4 Color Rotogravure Printing Making Machine India
4 Color Rotogravure Printing Making Machine in Ahmedabad
4 Color Rotogravure Printing Making Machine Manufacturer
4 Color Rotogravure Printing Making Machine Plant
4 Color Rotogravure Printing Making Machine Line
4 Color Rotogravure Printing Making Machine Unit
4 Color Rotogravure Printing Making Machine Exporter
#4 #Color #Rotogravure #Printing #Making #Machine

Multi Color Rotogravure Printing Machine

Multi Color Rotogravure Printing Machine India

Multi Color Rotogravure Printing Machine Manufacturer

Multi Color Rotogravure Printing Machine Plant

Multi Color Rotogravure Printing Machine Line

Multi Color Rotogravure Printing Machine Unit

Multi Color Rotogravure Printing Machine Export

Multi Color Rotogravure Printing Machine in Ahmedabad

 

This Rotogravure Printing Machine Is Suitable For Multi-Color Once-Through Continuous Printing For Roll Film Materials With Excellent Printing Performance Such As BOPP, PET, PVC, PE, Aluminum Foil And Paper, Etc. It Is Composed Of Unwinding Unit, In-Feed Drive Unit, Printing Units, Drying Units, Out-Feed Drive Unit, Rewinding Unit, Electrical Control Section And Control Gauges.

 

Feature of Multi Color Rotogravure Printing Machine:-

1 Equipped With Microprocessor And Can Correct The Deviation Of Color

Register Quickly And Accurately.

2. In 7" Touch Screen Man-Machine Interface, With Web Video.

3. External Un/Rewinding Section, Non-Stop Material Splicing.

4.Closed Oven And Independent Heating Hot Air Blowing System, Automatic

Constant Temperature System.

5.Pneumatic Impressing System And Pneumatic Doctor Blade System,

Diaphragm-Type Pneumatic Ink Auto Circulating System.

Rotogravure Printing Machine Technical Data:

BOPP???15-60um PET???12-60um PVC:30-60um

CPP???25-60um PE???40-100um Cello paper???20-30um

paper???30-80g Laminated film???10-60um

2 Printing color quantity:8color

3 Machinery speed: 130m/min

4 Printing speed: 10-120m/min

5 Diameter of printing plate: ø100mm~ø320mm

6 Machine total power : about 110kw

7 Max printing width: 800mm

8,Max material width: 830mm

9 Max diameter of unwinding and rewinding: ø600mm

10 Pressure source: 0.8Mpa

11 Scope of tension: 3-25KG

12 Tension precision: ±0.3K

13 Machine Size: 13500X2800X 2600mm

15 Weight of machine: 14T

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Multicolor Rotogravure Printing Making Machine
Multicolor Rotogravure Printing Making Machine India
Multicolor Rotogravure Printing Making Machine in Ahmedabad
Multicolor Rotogravure Printing Making Machine Manufacturer
Multicolor Rotogravure Printing Making Machine Plant
Multicolor Rotogravure Printing Making Machine Line
Multicolor Rotogravure Printing Making Machine Unit
Multicolor Rotogravure Printing Making Machine Exporter
#Multicolor #Rotogravure #Printing #Making #Machine

Multi Color Rotogravure Printing Machine

Multi Color Rotogravure Printing Machine India

Multi Color Rotogravure Printing Machine Manufacturer

Multi Color Rotogravure Printing Machine Plant

Multi Color Rotogravure Printing Machine Line

Multi Color Rotogravure Printing Machine Unit

Multi Color Rotogravure Printing Machine Export

Multi Color Rotogravure Printing Machine in Ahmedabad

 

This Rotogravure Printing Machine Is Suitable For Multi-Color Once-Through Continuous Printing For Roll Film Materials With Excellent Printing Performance Such As BOPP, PET, PVC, PE, Aluminum Foil And Paper, Etc. It Is Composed Of Unwinding Unit, In-Feed Drive Unit, Printing Units, Drying Units, Out-Feed Drive Unit, Rewinding Unit, Electrical Control Section And Control Gauges.

 

Feature of Multi Color Rotogravure Printing Machine:-

1 Equipped With Microprocessor And Can Correct The Deviation Of Color

Register Quickly And Accurately.

2. In 7" Touch Screen Man-Machine Interface, With Web Video.

3. External Un/Rewinding Section, Non-Stop Material Splicing.

4.Closed Oven And Independent Heating Hot Air Blowing System, Automatic

Constant Temperature System.

5.Pneumatic Impressing System And Pneumatic Doctor Blade System,

Diaphragm-Type Pneumatic Ink Auto Circulating System.

Rotogravure Printing Machine Technical Data:

BOPP???15-60um PET???12-60um PVC:30-60um

CPP???25-60um PE???40-100um Cello paper???20-30um

paper???30-80g Laminated film???10-60um

2 Printing color quantity:8color

3 Machinery speed: 130m/min

4 Printing speed: 10-120m/min

5 Diameter of printing plate: ø100mm~ø320mm

6 Machine total power : about 110kw

7 Max printing width: 800mm

8,Max material width: 830mm

9 Max diameter of unwinding and rewinding: ø600mm

10 Pressure source: 0.8Mpa

11 Scope of tension: 3-25KG

12 Tension precision: ±0.3K

13 Machine Size: 13500X2800X 2600mm

15 Weight of machine: 14T

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Film Printing Machine in Ocean Rotolfex The most advanced generation of super high speed, stack type flexo printing machine crystallized by our R&D team’s endeavor work from years of evolution in printing industry. The machines are designed with economical materials for ink rollers, doctor blade and printing rollers. The advantage of this series satisfy obverse and reverse printing needs while achieving the shortest production time, enhanced productivity, and lower costs. Film Printing Machine in Ocean Rotolfex

The machine is suitable for printing LDPE/HMHDPE/PP Film and Paper:

• Forward inching facility.
• Auto stop for web break.
• Individual air controller for each station.
• Impression rollers and Anilox rollers are dynamically balanced, ground and hard chrome plated.
• Helical gears for reduced play, smooth movement and long life.
• Manual Registration Adjustments:
• Horizontal: +/-17mm with locking
• Vertical: +/-17mm

Film Printing Machine in Ocean Rotolfex

• Auto Tension Controller
• Auto web guiding system
• Air shaft and safety chucks on unwind and rewind station
• Printing repeat length and width in various sizes as per customer’s requirements,
• Printing Width: 500 to 1600 mm
• Repeat Length: 200 to 2000mm
• Film Printing Machine in Ocean Rotolfex

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Port of Dispatch: Mundra
• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Automatic Rotogravure Printing Machine Manufacturer:-

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Automatic Rotogravure Printing Machine Manufacturer

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of Automatic Rotogravure Printing Machine Manufacturer:-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of Automatic Rotogravure Printing Machine Manufacturer:-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

 

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days

Product Details:

Rotogravure printing process

The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:

Films such as polyester, OPP, nylon, and PE

Papers

Carton board

Aluminum foil

The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.

The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.

Rotogravure printing presses

The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:

Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed

Doctor blade:  the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections

Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder

Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes

Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume

 

Process description of :-

During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.

 

Applications of :-

Typical gravure printed products include:

Food packaging

Wall paper

Wrapping paper

Furniture laminates

Paneling 

Greeting cards

Magazines

Additional Information:

• Delivery Time: 90 Working Days