Rotogravure Printing Machine
We Manufacture Rotogravure Printing Machine For BOPP, Rotogravure Printing Machine For PET, Rotogravure Printing Machine For PE, Rotogravure Printing Machine For Aluminum Foil, ,Rotogravure Printing Machine For Plastic Food Bag, ETC.
This Rotogravure Printing Machine Is Suitable For Multi-Color Once-Through Continuous Printing For Roll Film Materials With Excellent Printing Performance Such As BOPP, PET, PVC, PE, Aluminum Foil And Paper, Etc. It Is Composed Of Unwinding Unit, In-Feed Drive Unit, Printing Units, Drying Units, Out-Feed Drive Unit, Rewinding Unit, Electrical Control Section And Control Gauges. This Is The Idea Rotogravure Printing Machine To Print The Different Type Material.
Feature of Rotogravure Printing Machine :-
1 Equipped With Microprocessor and Can Correct the Deviation Of Color
Register Quickly And Accurately.
2. in 7" Touch Screen Man-Machine Interface, With Web Video.
3. External Un/Rewinding Section, Non-Stop Material Splicing.
4.Closed Oven And Independent Heating Hot Air Blowing System, Automatic
Constant Temperature System.
5.Pneumatic Impressing System And Pneumatic Doctor Blade System,
Optional Features of Rotogravure Printing Machine :-
Ink circulation pump
Ink viscosity controller
Turn bar system for reverse printing
ARC (Auto register controller)
Web video inspecation system
Exhaust motor
Exhaust duct
Pre-heat dry chamber
Electrostatic assist system (ESA)
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Brand | OCEAN INTERNATIONAL |
Processed Materials | Aluminum Foil |
Max Speed | 200-250 m/min, 100-150 m/min |
Max Web Width | 500-700 mm |
Printing Station | Customized |
Dimensions | 22 x 5 x 6 ( L X W X H ) |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
Frequency | 50 Hz |
No. Of Color | 1 - 10 |
Power | 56.70 ( kw ) |
Printer Type | Rotogravure |
Product Type | Rotogravure Printing Machine |
Voltage | 220-315 Volt |
I Deal In | New Only |
Country of Origin | Made in India |
Rotogravure Printing Machine is used in flexible packaging manufacturing and printing process including polyester, Nylon, Bopp, Foil, low and high density polyethylene polypro plane and paper with two sided printing facilities with high speed hot air dryers. Electronic Line Shaft (ELS)Rotogravure Printing Machine The high speed Electronic Line Shaft (ELS)Rotogravure Printing Machine has the great flexibilities and high resolution color combination at faster rate. The rotogravure printing machine is well designed for precision engineering for best industry standard requirements of valued clients with technical excellence, easy machine operations with good efficiency and performance, high durability and reliability with standard parts made from sturdy materials.
Electronic Line Shaft (ELS)Rotogravure Printing Machineis designed to support flexible packaging film manufacturing industry. Rotogravure print plant is an expert supplementary solution that can be added to the existing flexible packaging film plant as it can print on variety of materials including paper, flexible films, aluminum foils, etc. Rotogravure printing line is a suitable choice to print on lamination lines made of different ingredients. Investing on this supplementary machine is a favorable opportunity to reduce the cost of secondary packaging requirements.
Electronic Line Shaft (ELS)Rotogravure Printing Machine, it is suitable for printing, polyethylene, polypropylene bag, and cellophane and roll paper.It is a kind of ideal printing equipment for producing paper packing bags for food, supermarket handbags, vest bags and clothes bags. This is our high speed 8 color rotogravure printing machine with 5 drive, web video & auto registration control system. It's a very nice & high profile machine.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Brand | OCEAN INTERNATIONAL |
Processed Materials | Laminates |
Max Speed | 100-150 m/min, 50-100 m/min |
Max Web Width | 250-500 mm, 500-700 mm |
Frequency | 50 Hz |
No. Of Phase | Single Phase |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Brand | OCEAN INTERNATIONAL |
Max Speed | 50-100 m/min, 100-150 m/min |
Max Web Width | 250-500 mm |
Automatic Grade | Automatic |
Printing Station | Customized |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
Frequency | 50 Hz |
Rotogravure Printing Making Machine is used in flexible packaging manufacturing and printing process including polyester, Nylon, Bopp, Foil, low and high density polyethylene polypro plane and paper with two sided printing facilities with high speed hot air dryers. Electronic Line Shaft (ELS)Rotogravure Printing Making Machine The high speed Electronic Line Shaft (ELS)Rotogravure Printing Making Machine has the great flexibilities and high resolution color combination at faster rate. The rotogravure printing machine is well designed for precision engineering for best industry standard requirements of valued clients with technical excellence, easy machine operations with good efficiency and performance, high durability and reliability with standard parts made from sturdy materials.
Rotogravure Printing Making Machine
Electronic Line Shaft (ELS)Rotogravure Printing Making Machine is designed to support flexible packaging film manufacturing industry. Rotogravure print plant is an expert supplementary solution that can be added to the existing flexible packaging film plant as it can print on variety of materials including paper, flexible films, aluminum foils, etc. Rotogravure printing line is a suitable choice to print on lamination lines made of different ingredients. Investing on this supplementary machine is a favorable opportunity to reduce the cost of secondary packaging requirements.
Rotogravure Printing Making Machine
Electronic Line Shaft (ELS)Rotogravure Printing Making Machine, it is suitable for printing, polyethylene, polypropylene bag, and cellophane and roll paper.It is a kind of ideal printing equipment for producing paper packing bags for food, supermarket handbags, vest bags and clothes bags. This is our high speed 8 color rotogravure printing machine with 5 drive, web video & auto registration control system. It's a very nice & high profile machine.
Rotogravure Printing Making Machine
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Brand | OCEAN INTERNATIONAL |
Processed Materials | Film |
Max Speed | 50-100 m/min |
Max Web Width | 500-700 mm |
Automation Grade | Automatic |
Applications | Lamination |
Printing Station | Customized |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
Printing Color | Single Color |
Singal Color Rotogravure Printing Machine is used in flexible packaging manufacturing and printing process including polyester, Nylon, Bopp, Foil, low and high density polyethylene polypro plane and paper with two sided printing facilities with high speed hot air dryers. Electronic Line Shaft (ELS)Singal Color Rotogravure Printing Machine The high speed Electronic Line Shaft (ELS)Singal Color Rotogravure Printing Machine has the great flexibilities and high resolution color combination at faster rate. The rotogravure printing machine is well designed for precision engineering for best industry standard requirements of valued clients with technical excellence, easy machine operations with good efficiency and performance, high durability and reliability with standard parts made from sturdy materials.
Electronic Line Shaft (ELS)Singal Color Rotogravure Printing Machine is designed to support flexible packaging film manufacturing industry. Rotogravure print plant is an expert supplementary solution that can be added to the existing flexible packaging film plant as it can print on variety of materials including paper, flexible films, aluminum foils, etc. Rotogravure printing line is a suitable choice to print on lamination lines made of different ingredients. Investing on this supplementary machine is a favorable opportunity to reduce the cost of secondary packaging requirements.
Singal Color Rotogravure Printing Machine
Electronic Line Shaft (ELS)Singal Color Rotogravure Printing Machine, it is suitable for printing, polyethylene, polypropylene bag, and cellophane and roll paper.It is a kind of ideal printing equipment for producing paper packing bags for food, supermarket handbags, vest bags and clothes bags. This is our high speed 8 color rotogravure printing machine with 5 drive, web video & auto registration control system. It's a very nice & high profile machine.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Brand | OCEAN INTERNATIONAL |
Processed Materials | Aluminum Foil |
Max Speed | 100-150 m/min |
Max Web Width | 500-700 mm |
Automation Grade | Automatic |
Applications | Lamination |
Printing Station | Customized |
Dimensions | 22 x 5 x 6 ( L X W X H ) |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
Frequency | 50 Hz |
No. Of Color | 1 - 10 |
Power | 56.70 ( kw ) |
Printer Type | Rotogravure |
Warranty | 1 Year |
Printing Speed | 110 - 200 m/min |
Product Type | Rotogravure Printing Machine |
Voltage | 56.70 ( kw ) |
Max. Line Speed | 110 - 200 m/min |
I Deal In | New Only |
Country of Origin | Made in India |
6 Color Rotogravure Printing Machine is used in flexible packaging manufacturing and printing process including polyester, Nylon, Bopp, Foil, low and high density polyethylene polypro plane and paper with two sided printing facilities with high speed hot air dryers. Electronic Line Shaft (ELS)6 Color Rotogravure Printing Machine The high speed Electronic Line Shaft (ELS)6 Color Rotogravure Printing Machine has the great flexibilities and high resolution color combination at faster rate. The rotogravure printing machine is well designed for precision engineering for best industry standard requirements of valued clients with technical excellence, easy machine operations with good efficiency and performance, high durability and reliability with standard parts made from sturdy materials.
6 Color Rotogravure Printing Machine
Electronic Line Shaft (ELS)6 Color Rotogravure Printing Machine is designed to support flexible packaging film manufacturing industry. Rotogravure print plant is an expert supplementary solution that can be added to the existing flexible packaging film plant as it can print on variety of materials including paper, flexible films, aluminum foils, etc. Rotogravure printing line is a suitable choice to print on lamination lines made of different ingredients. Investing on this supplementary machine is a favorable opportunity to reduce the cost of secondary packaging requirements.
6 Color Rotogravure Printing Machine
Electronic Line Shaft (ELS)6 Color Rotogravure Printing Machine, it is suitable for printing, polyethylene, polypropylene bag, and cellophane and roll paper.It is a kind of ideal printing equipment for producing paper packing bags for food, supermarket handbags, vest bags and clothes bags. This is our high speed 8 color rotogravure printing machine with 5 drive, web video & auto registration control system. It's a very nice & high profile machine.
6 Color Rotogravure Printing Machine
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Brand | OCEAN INTERNATIONAL |
Processed Materials | Paper |
Max Speed | 100-150 m/min |
Max Web Width | 500-700 mm |
Automatic Grade | Automatic |
Printing Station | Customized |
Dimensions | 22 x 5 x 6 ( L X W X H ) |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
Material | Mild Steel |
No. Of Color | 1 - 10 |
No. Of Phase | Single Phase |
Power | 56.70 ( kw ) |
Printer Type | Rotogravure |
Printing Speed | 110 - 200 m/min |
Product Type | Rotogravure Printing Machine |
Voltage | 56.70 ( kw ) |
I Deal In | New Only |
Country of Origin | Made in India |
2 Color Rotogravure Printing Machine is used in flexible packaging manufacturing and printing process including polyester, Nylon, Bopp, Foil, low and high density polyethylene polypro plane and paper with two sided printing facilities with high speed hot air dryers. Electronic Line Shaft (ELS)2 Color Rotogravure Printing MachineThe high speed Electronic Line Shaft (ELS)2 Color Rotogravure Printing Machinehas the great flexibilities and high resolution color combination at faster rate. The rotogravure printing machine is well designed for precision engineering for best industry standard requirements of valued clients with technical excellence, easy machine operations with good efficiency and performance, high durability and reliability with standard parts made from sturdy materials.
Electronic Line Shaft (ELS)2 Color Rotogravure Printing Machine is designed to support flexible packaging film manufacturing industry. Rotogravure print plant is an expert supplementary solution that can be added to the existing flexible packaging film plant as it can print on variety of materials including paper, flexible films, aluminum foils, etc. Rotogravure printing line is a suitable choice to print on lamination lines made of different ingredients. Investing on this supplementary machine is a favorable opportunity to reduce the cost of secondary packaging requirements.
Electronic Line Shaft (ELS)Rotogravure Printing Machine, it is suitable for printing, polyethylene, polypropylene bag, and cellophane and roll paper.It is a kind of ideal printing equipment for producing paper packing bags for food, supermarket handbags, vest bags and clothes bags. This is our high speed 8 color rotogravure printing machine with 5 drive, web video & auto registration control system. It's a very nice & high profile machine.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Automation Grade | Automatic |
Color Printing | Color Printing |
Brand | OCEAN INTERNATIONAL |
Processed Materials | Aluminum Foil |
Max Speed | 100-150 m/min |
Max Web Width | 250-500 mm |
Printing Station | Customized |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
Frequency | 50 Hz |
No. Of Color | 1 - 10 |
Multi Color Rotogravure Printing Machine
Multi Color Rotogravure Printing Machine India
Multi Color Rotogravure Printing Machine Manufacturer
Multi Color Rotogravure Printing Machine Plant
Multi Color Rotogravure Printing Machine Line
Multi Color Rotogravure Printing Machine Unit
Multi Color Rotogravure Printing Machine Export
Multi Color Rotogravure Printing Machine in Ahmedabad
This Rotogravure Printing Machine Is Suitable For Multi-Color Once-Through Continuous Printing For Roll Film Materials With Excellent Printing Performance Such As BOPP, PET, PVC, PE, Aluminum Foil And Paper, Etc. It Is Composed Of Unwinding Unit, In-Feed Drive Unit, Printing Units, Drying Units, Out-Feed Drive Unit, Rewinding Unit, Electrical Control Section And Control Gauges.
Feature of Multi Color Rotogravure Printing Machine:-
1 Equipped With Microprocessor And Can Correct The Deviation Of Color
Register Quickly And Accurately.
2. In 7" Touch Screen Man-Machine Interface, With Web Video.
3. External Un/Rewinding Section, Non-Stop Material Splicing.
4.Closed Oven And Independent Heating Hot Air Blowing System, Automatic
Constant Temperature System.
5.Pneumatic Impressing System And Pneumatic Doctor Blade System,
Diaphragm-Type Pneumatic Ink Auto Circulating System.
Rotogravure Printing Machine Technical Data:
BOPP???15-60um PET???12-60um PVC:30-60um
CPP???25-60um PE???40-100um Cello paper???20-30um
paper???30-80g Laminated film???10-60um
2 Printing color quantity:8color
3 Machinery speed: 130m/min
4 Printing speed: 10-120m/min
5 Diameter of printing plate: ø100mm~ø320mm
6 Machine total power : about 110kw
7 Max printing width: 800mm
8,Max material width: 830mm
9 Max diameter of unwinding and rewinding: ø600mm
10 Pressure source: 0.8Mpa
11 Scope of tension: 3-25KG
12 Tension precision: ±0.3K
13 Machine Size: 13500X2800X 2600mm
15 Weight of machine: 14T
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Brand | OCEAN INTERNATIONAL |
Color Printing | Color Printing |
Processed Materials | Aluminum Foil |
Max Speed | 0-50 m/min |
Max Web Width | 500-700 mm |
Automation Grade | Automatic |
Automatic Grade | Automatic |
Printing Station | Customized |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
Material | Mild Steel |
Multi Color Rotogravure Printing Machine
Multi Color Rotogravure Printing Machine India
Multi Color Rotogravure Printing Machine Manufacturer
Multi Color Rotogravure Printing Machine Plant
Multi Color Rotogravure Printing Machine Line
Multi Color Rotogravure Printing Machine Unit
Multi Color Rotogravure Printing Machine Export
Multi Color Rotogravure Printing Machine in Ahmedabad
This Rotogravure Printing Machine Is Suitable For Multi-Color Once-Through Continuous Printing For Roll Film Materials With Excellent Printing Performance Such As BOPP, PET, PVC, PE, Aluminum Foil And Paper, Etc. It Is Composed Of Unwinding Unit, In-Feed Drive Unit, Printing Units, Drying Units, Out-Feed Drive Unit, Rewinding Unit, Electrical Control Section And Control Gauges.
Feature of Multi Color Rotogravure Printing Machine:-
1 Equipped With Microprocessor And Can Correct The Deviation Of Color
Register Quickly And Accurately.
2. In 7" Touch Screen Man-Machine Interface, With Web Video.
3. External Un/Rewinding Section, Non-Stop Material Splicing.
4.Closed Oven And Independent Heating Hot Air Blowing System, Automatic
Constant Temperature System.
5.Pneumatic Impressing System And Pneumatic Doctor Blade System,
Diaphragm-Type Pneumatic Ink Auto Circulating System.
Rotogravure Printing Making Machine Technical Data:
BOPP???15-60um PET???12-60um PVC:30-60um
CPP???25-60um PE???40-100um Cello paper???20-30um
paper???30-80g Laminated film???10-60um
2 Printing color quantity:8color
3 Machinery speed: 130m/min
4 Printing speed: 10-120m/min
5 Diameter of printing plate: ø100mm~ø320mm
6 Machine total power : about 110kw
7 Max printing width: 800mm
8,Max material width: 830mm
9 Max diameter of unwinding and rewinding: ø600mm
10 Pressure source: 0.8Mpa
11 Scope of tension: 3-25KG
12 Tension precision: ±0.3K
13 Machine Size: 13500X2800X 2600mm
15 Weight of machine: 14T
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Brand | OCEAN INTERNATIONAL |
Processed Materials | Aluminum Foil |
Max Speed | 50-100 m/min |
Max Web Width | 500-700 mm |
Automation Grade | Automatic |
Printing Station | Customized |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
Frequency | 50 Hz |
Multi Color Rotogravure Printing Machine
Multi Color Rotogravure Printing Machine India
Multi Color Rotogravure Printing Machine Manufacturer
Multi Color Rotogravure Printing Machine Plant
Multi Color Rotogravure Printing Machine Line
Multi Color Rotogravure Printing Machine Unit
Multi Color Rotogravure Printing Machine Export
Multi Color Rotogravure Printing Machine in Ahmedabad
This Rotogravure Printing Machine Is Suitable For Multi-Color Once-Through Continuous Printing For Roll Film Materials With Excellent Printing Performance Such As BOPP, PET, PVC, PE, Aluminum Foil And Paper, Etc. It Is Composed Of Unwinding Unit, In-Feed Drive Unit, Printing Units, Drying Units, Out-Feed Drive Unit, Rewinding Unit, Electrical Control Section And Control Gauges.
Feature of Multi Color Rotogravure Printing Machine:-
1 Equipped With Microprocessor And Can Correct The Deviation Of Color
Register Quickly And Accurately.
2. In 7" Touch Screen Man-Machine Interface, With Web Video.
3. External Un/Rewinding Section, Non-Stop Material Splicing.
4.Closed Oven And Independent Heating Hot Air Blowing System, Automatic
Constant Temperature System.
5.Pneumatic Impressing System And Pneumatic Doctor Blade System,
Diaphragm-Type Pneumatic Ink Auto Circulating System.
Rotogravure Printing Machine Technical Data:
BOPP???15-60um PET???12-60um PVC:30-60um
CPP???25-60um PE???40-100um Cello paper???20-30um
paper???30-80g Laminated film???10-60um
2 Printing color quantity:8color
3 Machinery speed: 130m/min
4 Printing speed: 10-120m/min
5 Diameter of printing plate: ø100mm~ø320mm
6 Machine total power : about 110kw
7 Max printing width: 800mm
8,Max material width: 830mm
9 Max diameter of unwinding and rewinding: ø600mm
10 Pressure source: 0.8Mpa
11 Scope of tension: 3-25KG
12 Tension precision: ±0.3K
13 Machine Size: 13500X2800X 2600mm
15 Weight of machine: 14T
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Printing Method | Roll to Roll |
Brand | OCEAN INTERNATIONAL |
Color Printing | Color Printing |
Processed Materials | Laminates |
Max Speed | 200-250 m/min, 100-150 m/min |
Max Web Width | 500-700 mm |
Applications | Lamination |
Automation Grade | Automatic |
Printing Station | 1 to 10 Station |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
No. Of Color | 1 to 10 Color |
Operating Speed | 150 - 250 ( mtr/min ) |
Power | 38.5 ( hp ) |
Printer Type | Rotogravure Printing Machine |
Printing Speed | 150 - 250 ( mtr/min ) |
Product Type | Rotogravure Printing Machine |
Voltage | 38.5 ( hp ) |
Weight | 6 - 7 ton |
Working Width | 300 - 1550 ( mm ) |
I Deal In | New Only |
Printing Color | 1 to 10 Color |
5 Drive Rotogravure Printing Plant
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
5 Drive Rotogravure Printing Plant:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 5 Drive Rotogravure Printing Plant:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 5 Drive Rotogravure Printing Plant:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Processed Materials | Laminates |
Max Speed | 100-150 m/min, 200-250 m/min |
Max Web Width | 500-700 mm |
Automation Grade | Automatic |
Applications | Lamination |
Printing Station | 1 to 10 Station |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
No. Of Color | 1 to 10 Color |
Operating Speed | 150 - 250 ( mtr/min ) |
Power | 38.5 ( hp ) |
Printer Type | Rotogravure Printing Machine |
Printing Speed | 150 - 250 ( mtr/min ) |
Product Type | Rotogravure Printing Machine |
Voltage | 38.5 ( hp ) |
Weight | 6 - 7 ton |
Working Width | 300 - 1550 ( mm ) |
I Deal In | New Only |
Brand | Ocean International |
5 Drive Rotogravure Printing LineL:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
5 Drive Rotogravure Printing Line:-
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 5 Drive Rotogravure Printing Line:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 5 Drive Rotogravure Printing Line:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Processed Materials | Laminates |
Max Speed | 200-250 m/min, 100-150 m/min |
Max Web Width | 500-700 mm |
Automation Grade | Automatic |
Applications | Lamination |
Printing Station | 1 to 10 Station |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
No. Of Color | 1 to 10 Color |
Operating Speed | 150 - 250 ( mtr/min ) |
Power | 38.5 ( hp ) |
Printer Type | Rotogravure Printing Machine |
Printing Speed | 150 - 250 ( mtr/min ) |
Product Type | Rotogravure Printing Machine |
Voltage | 38.5 ( hp ) |
Weight | 6 - 7 ton |
Working Width | 300 - 1550 ( mm ) |
I Deal In | New Only |
Brand | Ocean International |
5 Drive Rotogravure Printing Machine Manufacturer:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
5 Drive Rotogravure Printing Machine Manufacturer
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 5 Drive Rotogravure Printing Machine Manufacturer:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 5 Drive Rotogravure Printing Machine Manufacturer:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Processed Materials | Laminates |
Max Speed | 200-250 m/min, 100-150 m/min |
Max Web Width | 500-700 mm |
Automation Grade | Automatic |
Applications | Lamination |
Printing Station | 1 to 10 Station |
Size/Dimension | 42 X 8 X 7 ( L X W X H ) |
No. Of Color | 1 to 10 Color |
Operating Speed | 150 - 250 ( mtr/min ) |
Power | 38.5 ( hp ) |
Printer Type | Rotogravure Printing Machine |
Printing Speed | 150 - 250 ( mtr/min ) |
Product Type | Rotogravure Printing Machine |
Voltage | 38.5 ( hp ) |
Weight | 6 - 7 ton |
Working Width | 300 - 1550 ( mm ) |
I Deal In | New Only |
Brand | Ocean International |
5 Drive Rotogravure Printing Plant Manufacturer:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
5 Drive Rotogravure Printing Plant Manufacturer
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 5 Drive Rotogravure Printing Plant Manufacturer:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 5 Drive Rotogravure Printing Plant Manufacturer:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Processed Materials | Laminates |
Max Speed | 100-150 m/min, 200-250 m/min |
Max Web Width | 500-700 mm |
Automation Grade | Automatic |
Applications | Lamination |
Printing Station | 1 to 10 Station |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
No. Of Color | 1 to 10 Color |
Operating Speed | 150 - 250 ( mtr/min ) |
Power | 38.5 ( hp ) |
Printer Type | Rotogravure Printing Machine |
Printing Speed | 150 - 250 ( mtr/min ) |
Product Type | Rotogravure Printing Machine |
Voltage | 38.5 ( hp ) |
Weight | 6 - 7 ton |
Working Width | 300 - 1550 ( mm ) |
I Deal In | New Only |
Brand | Ocean International |
5 Drive Rotogravure Printing Line Manufacturer
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
5 Drive Rotogravure Printing Line Manufacturer
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 5 Drive Rotogravure Printing Line Manufacturer:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 5 Drive Rotogravure Printing Line Manufacturer:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Processed Materials | Laminates |
Max Speed | 200-250 m/min, 100-150 m/min |
Max Web Width | 500-700 mm |
Automation Grade | Automatic |
Applications | Lamination |
Printing Station | 1 to 10 Station |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
No. Of Color | 1 to 10 Color |
Operating Speed | 150 - 250 ( mtr/min ) |
Power | 38.5 ( hp ) |
Printer Type | Rotogravure Printing Machine |
Printing Speed | 150 - 250 ( mtr/min ) |
Product Type | Rotogravure Printing Machine |
Voltage | 38.5 ( hp ) |
Weight | 6 - 7 ton |
Working Width | 300 - 1550 ( mm ) |
I Deal In | New Only |
Brand | Ocean International |
Printing Color | 1 to 10 Color |
5 Drive Rotogravure Printing Machine in India
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
5 Drive Rotogravure Printing Machine in India
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 5 Drive Rotogravure Printing Machine in India:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 5 Drive Rotogravure Printing Machine in India:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Processed Materials | Laminates |
Max Speed | 200-250 m/min, 100-150 m/min |
Max Web Width | 500-700 mm |
Automation Grade | Automatic |
Applications | Lamination |
Printing Station | 1 to 10 Station |
Size/Dimension | 42 X 8 X 7 ( L X W X H ) |
No. Of Color | 1 to 10 Color |
Operating Speed | 150 - 250 ( mtr/min ) |
Power | 38.5 ( hp ) |
Printer Type | Rotogravure Printing Machine |
Printing Speed | 150 - 250 ( mtr/min ) |
Product Type | Rotogravure Printing Machine |
Voltage | 38.5 ( hp ) |
Weight | 6 - 7 ton |
Working Width | 300 - 1550 ( mm ) |
I Deal In | New Only |
Brand | Ocean International |
5 Drive Rotogravure Printing Line in India:-
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
5 Drive Rotogravure Printing Line in India
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of 5 Drive Rotogravure Printing Line in India:-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of 5 Drive Rotogravure Printing Line in India:-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
MagazinesAdditional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Usage/Application | printing |
Processed Materials | Laminates |
Max Speed | 200-250 m/min, 100-150 m/min |
Max Web Width | 500-700 mm, >900 mm |
Automation Grade | Automatic |
Applications | Reel to Reel Delivery |
Printing Station | Customized |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
No. Of Color | 1 - 10 |
Rotogravure printing process
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
Rotogravure printing presses
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of :-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of :-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Max Speed | 200-250 m/min, 100-150 m/min |
Max Web Width | 500-700 mm |
Automation Grade | Automatic |
Printing Station | Customized |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
No. Of Color | 1 - 10 |
Rotogravure printing process
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
Rotogravure printing presses
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of :-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of :-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Max Speed | 200-250 m/min, 100-150 m/min |
Max Web Width | 500-700 mm |
Automation Grade | Automatic |
Printing Station | Customized |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
No. Of Color | 1 - 10 |
Rotogravure printing process
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
Rotogravure printing presses
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of :-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of :-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Processed Materials | Laminates |
Max Speed | 100-150 m/min |
Max Web Width | >900 mm |
Automation Grade | Automatic |
Applications | Reel to Reel Delivery |
Printing Station | Customized |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
No. Of Color | 1 - 10 |
Rotogravure printing process
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
Rotogravure printing presses
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of :-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of :-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Max Speed | 200-250 m/min, 100-150 m/min |
Max Web Width | 500-700 mm |
Automation Grade | Automatic |
Printing Station | Customized |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
No. Of Color | 1 - 10 |
Rotogravure printing process
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
Rotogravure printing presses
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of :-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of :-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Printing Method | Roll to Roll |
Brand | OCEAN INTERNATIONAL |
Processed Materials | Aluminum Foil, Film, Laminates |
Max Speed | 100-150 m/min |
Max Web Width | 700-900 mm |
Applications | Reel to Reel Delivery |
Automation Grade | Automatic |
Printing Station | Customized |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
No. Of Color | 1 - 10 |
Country of Origin | Made in India |
Rotogravure printing process
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
Rotogravure printing presses
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of :-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of :-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Max Speed | 200-250 m/min, 100-150 m/min |
Max Web Width | 500-700 mm |
Automation Grade | Automatic |
Printing Station | Customized |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
No. Of Color | 1 - 10 |
Rotogravure printing process
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
Rotogravure printing presses
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of :-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of :-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Processed Materials | Laminates |
Max Speed | 100-150 m/min, 200-250 m/min |
Max Web Width | >900 mm, 500-700 mm |
Automation Grade | Automatic |
Applications | Reel to Reel Delivery |
Printing Station | 10 |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
No. Of Color | 1 - 10 |
Rotogravure printing process
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
Rotogravure printing presses
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of :-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of :-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Processed Materials | Film |
Max Speed | 100-150 m/min |
Max Web Width | >900 mm |
Automation Grade | Automatic |
Applications | Reel to Reel Delivery |
Printing Station | Customized |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
No. Of Color | 1 - 10 |
Rotogravure printing process
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
Rotogravure printing presses
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of :-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of :-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Processed Materials | Laminates |
Max Speed | 100-150 m/min |
Max Web Width | >900 mm |
Automation Grade | Automatic |
Applications | Reel to Reel Delivery |
Printing Station | Customized |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
No. Of Color | 1 - 10 |
Rotogravure printing process
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
Rotogravure printing presses
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of :-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of :-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Max Speed | 200-250 m/min, 100-150 m/min |
Max Web Width | 500-700 mm |
Automation Grade | Automatic |
Printing Station | Customized |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
No. Of Color | 1 - 10 |
Rotogravure printing process
The rotogravure process is a direct transfer method for printing onto wood-pulp fiber based, synthetic, or laminated substrates, including:
Films such as polyester, OPP, nylon, and PE
Papers
Carton board
Aluminum foil
The modern day rotogravure printing press uses a printing cylinder which has been laser engraved with minute cells capable of retaining ink, the size and pattern of which reflect the required image. These cells are forced to transfer their ink directly onto the substrate by a combination of pressure and capillary action, so producing the printed image.
The process, also commonly called gravure printing, is used in the manufacturing of food and non-food packaging, as well as labels, wall coverings, transfer printing, and has a variety of further applications in the security printing, industrial, and tobacco segments of industry.
Rotogravure printing presses
The layout of a gravure printing press follows an in-line arrangement where the required number of printing units is installed along a horizontal plane. In a conventional gravure printing press, each unit comprises of:
Printing cylinder: a seamless tubular sleeve or full cylinder, made from either steel, aluminum, plastic, or composite material, which is engraved with the image to be printed
Doctor blade: the device that removes ink from the non-engraved portions of the printing cylinder and also removes excess ink from the engraved sections
Impression roller: a rubber covered sleeve that is mounted on a steel mandrel. Its primary purpose is to press the substrate against the printing cylinder
Inking system: consisting of an ink pan, ink holding tank, and ink pump with supply and return ink pipes
Drying system: consisting of a chamber which dries the ink once it is on the substrate and prior to it reaching the next printing unit. Drier capacities are determined based on the required printing speed, ink type (solvent or water based), and ink lay down volume
Process description of :-
During the gravure printing process the printing cylinder rotates in the ink pan where the engraved cells fill with ink. As the cylinder rotates clear of the ink pan, any excess ink is removed by the doctor blade. Further around, the cylinder is brought into contact with the substrate, which is pressed against it by the rubber covered impression roller.
Applications of :-
Typical gravure printed products include:
Food packaging
Wall paper
Wrapping paper
Furniture laminates
Paneling
Greeting cards
Magazines
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Maximum Cutting Speed | 100 - 500 mm/sec |
Printing Method | Roll to Roll |
Brand | OCEAN INTERNATIONAL |
Color Printing | Color Printing |
Max Printing Width | 1000-1500 mm |
Machine Type | Automatic |
Max Speed | 100-150 m/min, 200-250 m/min |
Max Web Width | 500-700 mm |
Automation Grade | Automatic |
Max Printing Length | 500-1000 (mm) |
Printing Station | Customized |
Material | Mild Steel |
Frequency | 50 Hz |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
Features OF Flexo Label Printing Companies In Ahmedabad:
Further Details Features:
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Brand | OCEAN INTERNATIONAL |
Processed Materials | Aluminum Foil |
Max Speed | 100-150 m/min |
Max Web Width | 500-700 mm |
Automatic Grade | Automatic |
Applications | Lamination |
Printing Station | Customized |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
This Rotogravure Printing Machine Is Suitable For Multi-Color Once-Through Continuous Printing For Roll Film Materials With Excellent Printing Performance Such As BOPP, PET, PVC, PE, Aluminum Foil And Paper, Etc. It Is Composed Of Unwinding Unit, In-Feed Drive Unit, Printing Units, Drying Units, Out-Feed Drive Unit, Rewinding Unit, Electrical Control Section And Control Gauges.
Feature of Multi Color Rotogravure Printing Machine:-
1 Equipped With Microprocessor And Can Correct The Deviation Of Color
Register Quickly And Accurately.
2. In 7" Touch Screen Man-Machine Interface, With Web Video.
3. External Un/Rewinding Section, Non-Stop Material Splicing.
4.Closed Oven And Independent Heating Hot Air Blowing System, Automatic
Constant Temperature System.
5.Pneumatic Impressing System And Pneumatic Doctor Blade System,
Diaphragm-Type Pneumatic Ink Auto Circulating System.
Rotogravure Printing Machine Technical Data:
BOPP:15-60um PET:12-60um PVC:30-60um
CPP:25-60um PE:40-100um Cello paper:20-30um
paper:30-80g Laminated film:10-60um
2 Printing color quantity:8color
3 Machinery speed: 130m/min
4 Printing speed: 10-120m/min
5 Diameter of printing plate: ø100mm~ø320mm
6 Machine total power : about 110kw
7 Max printing width: 800mm
8,Max material width: 830mm
9 Max diameter of unwinding and rewinding: ø600mm
10 Pressure source: 0.8Mpa
11 Scope of tension: 3-25KG
12 Tension precision: ±0.3K
13 Machine Size: 13500X2800X 2600mm
15 Weight of machine: 14T
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Brand | Ocean Rotoflex |
Color Printing | Color Printing |
Processed Materials | Paper, Film |
Max Speed | 100-150 m/min |
Max Web Width | 500-700 mm |
Applications | Die Cutting |
Automation Grade | Automatic |
Automatic Grade | Automatic |
Printing Station | Customized |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
No. Of Color | 1 - 10 |
Power | 56.70 ( kw ) |
Printer Type | Rotogravure |
Printing Speed | 110 - 200 m/min |
Product Type | Rotogravure Printing Machine |
I Deal In | New Only |
This Rotogravure Printing Machine Is Suitable For Multi-Color Once-Through Continuous Printing For Roll Film Materials With Excellent Printing Performance Such As BOPP, PET, PVC, PE, Aluminum Foil And Paper, Etc. It Is Composed Of Unwinding Unit, In-Feed Drive Unit, Printing Units, Drying Units, Out-Feed Drive Unit, Rewinding Unit, Electrical Control Section And Control Gauges.
Feature of Multi Color Rotogravure Printing Machine:-
1 Equipped With Microprocessor And Can Correct The Deviation Of Color
Register Quickly And Accurately.
2. In 7" Touch Screen Man-Machine Interface, With Web Video.
3. External Un/Rewinding Section, Non-Stop Material Splicing.
4.Closed Oven And Independent Heating Hot Air Blowing System, Automatic
Constant Temperature System.
5.Pneumatic Impressing System And Pneumatic Doctor Blade System,
Diaphragm-Type Pneumatic Ink Auto Circulating System.
Rotogravure Printing Machine Technical Data:
BOPP???15-60um PET???12-60um PVC:30-60um
CPP???25-60um PE???40-100um Cello paper???20-30um
paper???30-80g Laminated film???10-60um
2 Printing color quantity:8color
3 Machinery speed: 130m/min
4 Printing speed: 10-120m/min
5 Diameter of printing plate: ø100mm~ø320mm
6 Machine total power : about 110kw
7 Max printing width: 800mm
8,Max material width: 830mm
9 Max diameter of unwinding and rewinding: ø600mm
10 Pressure source: 0.8Mpa
11 Scope of tension: 3-25KG
12 Tension precision: ±0.3K
13 Machine Size: 13500X2800X 2600mm
15 Weight of machine: 14T
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Brand | Ocean Rotoflex |
Color Printing | Color Printing |
Processed Materials | Aluminum Foil |
Max Speed | 100-150 m/min |
Max Web Width | 700-900 mm |
Automation Grade | Automatic |
Applications | Lamination |
Automatic Grade | Automatic |
Printing Station | Customized |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
No. Of Color | 1 - 10 |
Power | 56.70 ( kw ) |
Printer Type | Rotogravure |
Printing Speed | 110 - 200 m/min |
Product Type | Rotogravure Printing Machine |
Voltage | 56.70 ( kw ) |
I Deal In | New Only |
This Rotogravure Printing Machine Is Suitable For Multi-Color Once-Through Continuous Printing For Roll Film Materials With Excellent Printing Performance Such As BOPP, PET, PVC, PE, Aluminum Foil And Paper, Etc. It Is Composed Of Unwinding Unit, In-Feed Drive Unit, Printing Units, Drying Units, Out-Feed Drive Unit, Rewinding Unit, Electrical Control Section And Control Gauges.
Feature of Multi Color Rotogravure Printing Machine:-
1 Equipped With Microprocessor And Can Correct The Deviation Of Color
Register Quickly And Accurately.
2. In 7" Touch Screen Man-Machine Interface, With Web Video.
3. External Un/Rewinding Section, Non-Stop Material Splicing.
4.Closed Oven And Independent Heating Hot Air Blowing System, Automatic
Constant Temperature System.
5.Pneumatic Impressing System And Pneumatic Doctor Blade System,
Diaphragm-Type Pneumatic Ink Auto Circulating System.
Rotogravure Printing Machine Technical Data:
BOPP???15-60um PET???12-60um PVC:30-60um
CPP???25-60um PE???40-100um Cello paper???20-30um
paper???30-80g Laminated film???10-60um
2 Printing color quantity:8color
3 Machinery speed: 130m/min
4 Printing speed: 10-120m/min
5 Diameter of printing plate: ø100mm~ø320mm
6 Machine total power : about 110kw
7 Max printing width: 800mm
8,Max material width: 830mm
9 Max diameter of unwinding and rewinding: ø600mm
10 Pressure source: 0.8Mpa
11 Scope of tension: 3-25KG
12 Tension precision: ±0.3K
13 Machine Size: 13500X2800X 2600mm
15 Weight of machine: 14T
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Processed Materials | Paper |
Max Speed | 100-150 m/min |
Max Web Width | 500-700 mm |
Automatic Grade | Automatic |
Applications | Lamination |
Printing Station | Customized |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
Frequency | 50 Hz |
No. Of Color | 1 - 10 |
Brand | Ocean International |
This Rotogravure Printing Machine Is Suitable For Multi-Color Once-Through Continuous Printing For Roll Film Materials With Excellent Printing Performance Such As BOPP, PET, PVC, PE, Aluminum Foil And Paper, Etc. It Is Composed Of Unwinding Unit, In-Feed Drive Unit, Printing Units, Drying Units, Out-Feed Drive Unit, Rewinding Unit, Electrical Control Section And Control Gauges.
Feature of Multi Color Rotogravure Printing Machine:-
1 Equipped With Microprocessor And Can Correct The Deviation Of Color
Register Quickly And Accurately.
2. In 7" Touch Screen Man-Machine Interface, With Web Video.
3. External Un/Rewinding Section, Non-Stop Material Splicing.
4.Closed Oven And Independent Heating Hot Air Blowing System, Automatic
Constant Temperature System.
5.Pneumatic Impressing System And Pneumatic Doctor Blade System,
Diaphragm-Type Pneumatic Ink Auto Circulating System.
Rotogravure Printing Machine Technical Data:
BOPP???15-60um PET???12-60um PVC:30-60um
CPP???25-60um PE???40-100um Cello paper???20-30um
paper???30-80g Laminated film???10-60um
2 Printing color quantity:8color
3 Machinery speed: 130m/min
4 Printing speed: 10-120m/min
5 Diameter of printing plate: ø100mm~ø320mm
6 Machine total power : about 110kw
7 Max printing width: 800mm
8,Max material width: 830mm
9 Max diameter of unwinding and rewinding: ø600mm
10 Pressure source: 0.8Mpa
11 Scope of tension: 3-25KG
12 Tension precision: ±0.3K
13 Machine Size: 13500X2800X 2600mm
15 Weight of machine: 14T
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Brand | OCEAN INTERNATIONAL |
Color Printing | Color Printing |
Processed Materials | Aluminum Foil |
Max Speed | 100-150 m/min |
Max Web Width | 500-700 mm |
Automation Grade | Automatic |
Applications | UV/EB Curing |
Automatic Grade | Automatic |
Printing Station | Customized |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
This Rotogravure Printing Machine Is Suitable For Multi-Color Once-Through Continuous Printing For Roll Film Materials With Excellent Printing Performance Such As BOPP, PET, PVC, PE, Aluminum Foil And Paper, Etc. It Is Composed Of Unwinding Unit, In-Feed Drive Unit, Printing Units, Drying Units, Out-Feed Drive Unit, Rewinding Unit, Electrical Control Section And Control Gauges.
Feature of Multi Color Rotogravure Printing Machine:-
1 Equipped With Microprocessor And Can Correct The Deviation Of Color
Register Quickly And Accurately.
2. In 7" Touch Screen Man-Machine Interface, With Web Video.
3. External Un/Rewinding Section, Non-Stop Material Splicing.
4.Closed Oven And Independent Heating Hot Air Blowing System, Automatic
Constant Temperature System.
5.Pneumatic Impressing System And Pneumatic Doctor Blade System,
Diaphragm-Type Pneumatic Ink Auto Circulating System.
Rotogravure Printing Machine Technical Data:
BOPP???15-60um PET???12-60um PVC:30-60um
CPP???25-60um PE???40-100um Cello paper???20-30um
paper???30-80g Laminated film???10-60um
2 Printing color quantity:8color
3 Machinery speed: 130m/min
4 Printing speed: 10-120m/min
5 Diameter of printing plate: ø100mm~ø320mm
6 Machine total power : about 110kw
7 Max printing width: 800mm
8,Max material width: 830mm
9 Max diameter of unwinding and rewinding: ø600mm
10 Pressure source: 0.8Mpa
11 Scope of tension: 3-25KG
12 Tension precision: ±0.3K
13 Machine Size: 13500X2800X 2600mm
15 Weight of machine: 14T
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Brand | OCEAN INTERNATIONAL |
Color Printing | Color Printing |
Processed Materials | Laminates |
Max Speed | 100-150 m/min |
Max Web Width | 500-700 mm |
Automation Grade | Automatic |
Applications | UV/EB Curing |
Automatic Grade | Automatic |
Printing Station | Customized |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
Material | Mild Steel |
No. Of Color | 1 - 10 |
Power | 56.70 ( kw ) |
Printer Type | Rotogravure |
Printing Speed | 110 - 200 m/min |
Product Type | Rotogravure Printing Machine |
Voltage | 56.70 ( kw ) |
I Deal In | New Only |
Country of Origin | Made in India |
This Rotogravure Printing Machine Is Suitable For Multi-Color Once-Through Continuous Printing For Roll Film Materials With Excellent Printing Performance Such As BOPP, PET, PVC, PE, Aluminum Foil And Paper, Etc. It Is Composed Of Unwinding Unit, In-Feed Drive Unit, Printing Units, Drying Units, Out-Feed Drive Unit, Rewinding Unit, Electrical Control Section And Control Gauges.
Feature of Multi Color Rotogravure Printing Machine:-
1 Equipped With Microprocessor And Can Correct The Deviation Of Color
Register Quickly And Accurately.
2. In 7" Touch Screen Man-Machine Interface, With Web Video.
3. External Un/Rewinding Section, Non-Stop Material Splicing.
4.Closed Oven And Independent Heating Hot Air Blowing System, Automatic
Constant Temperature System.
5.Pneumatic Impressing System And Pneumatic Doctor Blade System,
Diaphragm-Type Pneumatic Ink Auto Circulating System.
Rotogravure Printing Machine Technical Data:
BOPP???15-60um PET???12-60um PVC:30-60um
CPP???25-60um PE???40-100um Cello paper???20-30um
paper???30-80g Laminated film???10-60um
2 Printing color quantity:8color
3 Machinery speed: 130m/min
4 Printing speed: 10-120m/min
5 Diameter of printing plate: ø100mm~ø320mm
6 Machine total power : about 110kw
7 Max printing width: 800mm
8,Max material width: 830mm
9 Max diameter of unwinding and rewinding: ø600mm
10 Pressure source: 0.8Mpa
11 Scope of tension: 3-25KG
12 Tension precision: ±0.3K
13 Machine Size: 13500X2800X 2600mm
15 Weight of machine: 14T
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Brand | OCEAN INTERNATIONAL |
Processed Materials | Aluminum Foil |
Max Speed | 100-150 m/min |
Max Web Width | 500-700 mm |
Automatic Grade | Automatic |
Printing Station | Customized |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
Frequency | 50 Hz |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Brand | OCEAN INTERNATIONAL |
Processed Materials | Film |
Max Speed | 100-150 m/min |
Max Web Width | 250-500 mm |
Automation Grade | Automatic |
Printing Station | Customized |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
Frequency | 50 Hz |
Material | Mild Steel |
No. Of Color | 1 - 10 |
No. Of Phase | Single Phase |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Brand | OCEAN INTERNATIONAL |
Processed Materials | Film |
Max Speed | 50-100 m/min |
Max Web Width | 500-700 mm |
Automatic Grade | Automatic |
Applications | Lamination |
Printing Station | Customized |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
Frequency | 50 Hz |
No. Of Color | 1 - 10 |
Power | 56.70 ( kw ) |
Printer Type | Rotogravure |
Product Type | Rotogravure Printing Machine |
Voltage | 56.70 ( kw ) |
I Deal In | New Only |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Brand | OCEAN INTERNATIONAL |
Processed Materials | Aluminum Foil |
Max Speed | 100-150 m/min |
Max Web Width | 500-700 mm |
Automatic Grade | Automatic |
Printing Station | Customized |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
No. Of Phase | Single Phase |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Color Printing | Color Printing |
Brand | OCEAN INTERNATIONAL |
Processed Materials | Aluminum Foil |
Max Speed | 100-150 m/min |
Max Web Width | 500-700 mm |
Automatic Grade | Automatic |
Printing Station | Customized |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
Frequency | 50 Hz |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Unit |
Printing Method | Roll to Roll |
Brand | OCEAN INTERNATIONAL |
Color Printing | Color Printing |
Processed Materials | Aluminum Foil |
Max Speed | 0-50 m/min |
Max Web Width | 500-700 mm |
Automation Grade | Automatic |
Automatic Grade | Automatic |
Printing Station | Customized |
Size/Dimension | 22 X 5 X 6 ( L X W X H ) Feet |
No. Of Color | 1 - 10 |
Power | 56.70 ( kw ) |
Printer Type | Rotogravure |
Printing Speed | 110 - 200 m/min |
Product Type | Rotogravure Printing Machine |
Voltage | 56.70 ( kw ) |
I Deal In | New Only |
Additional Information: